HobbyKing
SPINNER 45DIAM / 4MM SHAFT
| Weight | 33g |
5 Reviews
HobbyKing
PROP ADAPTER W/ ALU CONE M8X6MM SHAFT (GRUB SCREW TYPE)
,
Propeller adapter. To suit; 6mm Motor Shaft. 8mm Propeller Shaft. ...5 Reviews
HobbyKing
TURNIGY RECEIVER CONTROLLED SWITCH
| Maximum throughput | 10A / 30v |
Weight: 7g,
Plug it into your receiver and you instantly have an ...5 Reviews
HobbyKing
TURNIGY 480L V-SPEC INRUNNER W/ IMPELLER 2150KV
| Diameter of shaft | 4mm |
| Length of front shaft | 13mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 2150kv |
| Max current | 60A |
| No load current | 2.0A |
| Internal resistance | 25.60ohm |
| Data | 4S 14.8V |
| Max Current | 25.5A, 33.2A, 46A |
| Pull | 870g, 1080g, 1320g |
| ESC | 60A |
| Battery Type | 3-4S Only |
Dimension:, 57mm x 30mm, 70mm(with shaft), Weight:, 143g (kv1500) (not including connectors), Lamination thickness: ., Prop:, APC6x4, APC6x6.5, APC7x4,
High torque inrunner, excellent for running propellers directly without needing ...5 Reviews
HobbyKing
KD COLET ADAPTER FOR 3MM SHAFTS
,
Colet adapter for motors with a 3mm shaft.5 Reviews
HobbyKing
TURNIGY MONSTER-2000 200A 4-12S BRUSHLESS ESC
| High rate adjustable switching (PWM | 12K Hz/18K Hz/24K Hz) |
| BEC | Nil |
| Cont. Current | 200A |
| Burst Current | 230A |
| BEC | Nil |
| Size | 125*60*38mm |
| Weight | 293g |
Features:, Microprocessor controlled, Battery:, 4-12 Cell Lipo / up to 38 Cell Ni-XX,
The Turnigy Monster-2000 is based on an all new powerful ...3 Reviews
HobbyKing
PROP ADAPTER W/ CONE M10X8MM SHAFT (GRUB SCREW TYPE)
,
Propeller adapter. To suit; 8mm Motor Shaft. 10mm Propeller Shaft. ...5 Reviews
HobbyKing
AHF-50 .50 SIZE NITRO 3D HELICOPTER KIT
| Control System | 120° CCPM |
| Rotor Blade Length | 600mm |
| Length | 1335mm |
| Height | 408mm |
| Width | 208mm |
| Gear ratio | 8.5 |
| Main rotor diameter | 1348mm |
| Tail rotor diameter | 263mm |
| Flying weight | Approx 3000g |
| Radio Gear | Gyro/Rx |
| Rx Battery | (UBEC with 2 Cell Lipoly) |
Type:, .50 size glow powered 3D Pro Helicopter,
An amazing quality kit, with excellent features and an advance ...5 Reviews
HobbyKing
SPINNER 30DIAM / 2.3MM SHAFT
| Diameter is | 30mm |
Weight:9g,
Spinner suits motors with a 2.3mm shaft. Lightweight spinner uses ...5 Reviews
HobbyKing
TURNIGY 380L V-SPEC INRUNNER W/ IMPELLER 2600KV
| Diameter of shaft | 4mm |
| Length of front shaft | 14mm |
| Battery | 3 Cell 11.1 |
| RPM | 2600kv |
| Max current | 50A |
| No load current | 1.8A |
| Internal resistance | 20.72ohm |
| Prop | 6x4, 8x3.8 |
| Max Current | 45A, 49A |
| Pull | 1100g, 1400g |
Dimension:, 28mm x 56mm, 70mm(with shaft), Weight:, 131g (kv2600) (not including connectors), Lamination thickness: .,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
SUPER GOLD PLUS ODORLESS CA GLUE 1. OZ (FOAM SAFE)
,
Super Gold Plus Odorless CA 1. oz SUPER-GOLD are our ...5 Reviews
HobbyKing
BMS-661MG+HS SUPER FAST SERVO (METAL GEAR) 5.3KG / .10SEC / 46.5G
| Weight | 46.5 grams / 1.66 oz |
| Dimensions | 40.5 x 20 x 38.5 mm / 1.60 x 0.78 x 1.54 inch |
| Torque At 4.8V | 5.3kg-cm , 76 oz-in |
| Torque At 6.0V | 6.4kg-cm , 89 oz-in |
| Speed At 4.8V | 0.10 sec / 60° at no load |
| Speed At 6.0V | 0.08 sec / 60° at no load |
5 Reviews
HobbyKing
TURNIGY 540S V-SPEC INRUNNER W/ IMPELLER 1100KV
| Diameter of shaft | 5mm |
| Length of front shaft | 13mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 1100kv |
| Max current | 45A |
| No load current | 2.1A |
| Internal resistance | 75.2ohm |
| Data | 4S 14.8V |
| Prop | 8x3.8, 9x4.5, 10x5 |
| Max Current | 24A, 29.4A, 35.5A |
| Pull | 1300g, 1570g, 1780g |
| ESC | 60A |
Dimension:, 52mm x 36mm, 66mm(with shaft), Weight:, 141g (kv1100) (not including connectors), Lamination thickness: .,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
SINGLE-ACTION AIR BRUSH SET.
| Standard Nozzle Dia. | 0.8mm |
| Operating Pressure | 15-50psi |
Specifications:, Spray pattern adjusts from,
Single-action airbrush set for easy painting of models. Low maintenance, ...5 Reviews
HobbyKing
TURNIGY 2205 50TURN 1088KV 8A OUTRUNNER
| Operating Current | 2A ~ 6A |
| Suggested prop | 9x3.8 or 9x4 |
| Suggested Battery | 1000mAh 3S1P |
| Weight | 30g |
| Dimensions | 27.6 x 22mm |
| Shaft Size | 3.175mm |
Kv: 1088rpm/v, Peak Current: 8A,
A good motor for small parkflyers or shockies. Swinging a ...5 Reviews